In Jeeb We Trust: holographic topcoat

Hey all,
Today I have a super summer fantastic water marble for you!
But before I get into that a few of my blogger girlfriends have asked me for my tips & tricks.
By no means do I believe I have mastered this technique.
However, I try to learn a little something each time I try it out.

Ok, if you don't know the basic water marble procedure, or want to know how to make certain designs, go to youtube.
There are tons (TONS) of fantastic tutorials that will tell you everything you need to know.
My water marble musts are just little steps to make the process less stressful and more satisfying.

jeebjeeb's tips & tricks

Little cups work better!
The less your polish spreads the more intense the colour will be and the slower it will dry.
I heard about using shot glasses but I found them to be too small,
and often banged my nails against the side and ruined the design :(
Think Dixie cup size. What I use is about 2.5 inches in diameter and I find it perfect.

Use room temperature, not so fresh, water.
I've heard bottled is best... Filtered is best... Bah! Doesn't matter.
What's I find works best is water that has been sitting out for a day.
It's at the temperature you want and it's had time to let some of the crap in it evaporate.
If I don't think ahead and leave out a cup for myself, well... I use my cat's water! All good!

If it's summer, turn off your fans!
The more air blowing around, the faster you'll have to work.
I learned this one the hard way when I tried marbling underneath my overhead fan.
It just sucks. And you don't want to think that you're the one sucking when really it's your fan.

Tape your damn fingers!
Self explanatory. You will thank yourself for taking the extra time.

Organize your area.
Layout your work station before you start and make sure everything is within reach but not crowded.
Last thing you want is to knock things over while you're creating your marble.
Unscrew the caps of all your bottles, put your toothpicks in a good spot. Again, you will thank yourself.

Don't rush yourself.
You know what happens when you rush. You make mistakes and messes.
When you're playing around with the polish you have a lot more time to play than you think.
In some of the youtube videos I've watched they're manipulating their bulls eye for a good two minutes!
Think of it like yoga, be in the moment, breathe and concentrate.
Remember, you master the marble, the marble doesn't master you!

One finger at a time.
I've seen a youtuber do all four fingers at once.
And as amazing as that is, I've never been able to make that work for me.
All I got was a big mess and lots of frustration.
But I do believe in you dear reader, so if you figure out a great way to do it, TELL ME!!

Use newer/ less used polish
Unlike stamping, marbles don't work with thick polish.
Brand new polish has the perfect consistency, but who wants to buy new polish every time they marble?
I don't! So my rule of thumb is, pick polishes you haven't used very often.
Like the orange I used below. I've had it for over a year, but only used it once.
It's still fresh as the day I got it, and works great!
That being said, not every polish will work for marbling, no matter how new.
Be prepared to improvise a bit.

Blow baby blow!
(maybe my most important tip)
I used to be plagued by little bubbles of air that would get trapped between the marble and my base colour.
And if you touch the bubbles they pop and expose the colour underneath. >:(
Not what I want after putting in all that effort.
The solution - blow them away!
Once your nail comes out of the cup - blow on it like you're 2 and it's a birthday candle.
For at least 30 seconds, huff, puff, blow that house down!
I promise you will never have a problem with those pesky bubbles again!

And that's pretty much it (for now) I'm probably forgetting something.
I hope this is somewhat helpful next time you try the technique.

Alrighty, on to the water marble! Or fire marble in this case...